The Jetour T2 (Traveller) is built for the trail, but even a body-on-frame off-roader runs out of usable space once you load recovery gear and weekend luggage. A side storage bag — the "small backpack" many owners add to the rear — reclaims that space with zero drilling.
Below is the full installation, following our workshop tutorial. It is drill-free, uses factory mounting points, and takes under an hour with basic hand tools.
Watch the full install: Chery Jetour T2 | Side Storage Bag Installation Tutorial
What's Included
Side storage bag, left/right side brackets, upper and lower brackets, top connector bracket, upper and lower magnetic strips, flat-head hex screws, cushioning sponge pads, and 2 buckles.
Tools You'll Need
A hex key for the supplied screws, a clean cloth to degrease the surface, and — optionally — a helper for final positioning.
Step-by-Step Installation
- Attach the brackets to the sponge pads. The pads protect the paintwork and dampen noise.
- Identify left and right. The brackets are mirror images — fitting them on the wrong side throws off every later step.
- Install the two side brackets. Insert the screw from the inside so the head sits flush.
- Build the upper bracket. Mount the top bracket and lock only six screws — leave slight play for alignment.
- Fit the lower bracket and magnetic strip. Install the bottom magnetic strip at the same time.
- Add the top connector bracket, then apply the cushioning sponge over the door/body contact areas.
- Mount two brackets on the luggage rack in a position that does not block the rear door switch. Remove the top connection screw, fit the bracket, then reinstall it — same on both sides.
- Position the bag on the brackets and lock the screw back in place.
- Adjust the magnetic bracket angle so the bag sits flush, then confirm both sides line up.
- Lock the screws at all connection points. This is the final torque step.
-
Open the bag and fit the two buckles to secure the closure.
Quick Tips
- Do a loose dry fit before torquing anything down.
- Keep the sponge pads at every metal-to-body contact point.
- Check rear door switch travel before you commit.
- Re-check the screws after your first drive.
Wholesale Jetour T2 Accessories by Maremlyn
Maremlyn (Guangzhou Yangdugang Auto Accessories Co., Ltd.) manufactures tailor-fit aftermarket accessories for off-road and new energy vehicles. Our Jetour T2 range includes side storage bags, roof platforms, side ladders, skid plates, mud flaps, body kits, and interior storage.
Why dealers buy from us: factory-direct bulk pricing, 1:1 OEM drill-free fitment, private-label customization, stable in-house supply, and worldwide shipping.
Explore the full range: Jetour T2 Accessories
Need bulk pricing or the latest catalog? Send us your model, market, and target quantity — Contact Us and we will follow up with wholesale pricing and lead times.