A body kit is the fastest way to give your BYD Song Pro 2025 (Sealion 5) a sportier, more personal look. The Maremlyn PP body kit — including a front lip and rear lip — is designed specifically for this model, so it follows the original body lines without any cutting or drilling guesswork.
This guide walks through the full installation process, the same one shown in our BYD Song Pro body kit installation video.
What's in the Kit
- Front lip — sharpens the bumper profile for a lower, more aggressive stance
- Rear lip — balances the tail section and completes the sport look
- PP material — lightweight, durable and flexible enough to absorb minor impacts
-
Mounting hardware — double-sided tape and self-tapping screws included
Tools You'll Need
- Clean towel
- Adhesive aid (primer)
- Double-sided tape (supplied)
- Self-tapping screws (supplied)
- Phillips screwdriver
Installation Steps
Front Lip
- Clean the bumper — wipe the glue position with a clean towel to remove all dust.
- Apply adhesive aid — on both the bumper and the lip to improve tape adhesion.
- Apply double-sided tape — run tape along the lip's mounting edge.
- Tear off 3–5 cm of backing — at both ends of the tape.
- Fit the lip — card one side into position first, then the other. Work it along the bumper.
- Press hard while tearing — remove the remaining backing paper while pressing the lip firmly against the bumper.
- Secure with screws — reserve the pre-cut hole at the bottom of the lip, then drive in a self-tapping screw. Add one screw on each side and two at the top for a rock-solid fit.
Rear Lip
Repeat the same process:
- Wipe the glue position clean and apply adhesive aid.
- Apply double-sided tape and tear off 3–5 cm of backing at both ends.
- Fit the lip — card one side first, then the other.
- Tear out the remaining tape backing while pressing hard.
- Drive two self-tapping screws into the left and right sides.
Total install time is around 30–40 minutes. The result: a factory-quality fit that transforms the Song Pro 2025's stance in one afternoon.
Why Choose Maremlyn
Every Maremlyn kit is developed from 3D laser scanning of the original vehicle, ensuring the lips match the bumper contours and hole positions exactly. The kit is available in black, pairs with the factory finish, and ships in reinforced cartons for safe international delivery.
Want to see it installed on a real car? Watch the full BYD 2025 Song Pro body kit installation showcase.
Ready to upgrade your own vehicle? Check out the Maremlyn body kit for BYD Song Pro and get yours shipped worldwide.