Introduction
The BYD Sealion 7 has quickly become one of the most talked-about electric SUVs on the market — bold styling, impressive range, and a sporty stance straight from the factory. But for distributors, retailers, and car enthusiasts looking to push that visual impact further, Maremlyn has developed a dedicated exterior upgrade package: a full BYD Sealion 7 body kit covering the front lip, side skirts, and rear bumper lip.
Developed using precise OEM vehicle scan data, this kit is not a universal retrofit — it is engineered specifically for the Sealion 7's contours, ensuring flush fitment and consistent panel gaps across every component.
What's in the Maremlyn Sealion 7 Body Kit?
The complete kit consists of three core exterior components:
| Component | Material | Finish | Mounting Method |
| Front Bumper Lip | PP (Polypropylene) | Atlantis Grey / Gloss Black | 3M adhesive + self-tapping screws |
| Side Skirts (pair) | PP (Polypropylene) | Atlantis Grey / Gloss Black | Self-tapping screws |
| Rear Bumper Lip | PP (Polypropylene) | Atlantis Grey / Gloss Black | 3M adhesive + self-tapping screws |
Contact us for installation videos
All three pieces share the same material and finish language, creating a cohesive, lowered visual profile that enhances the Sealion 7's already aggressive front fascia and rear diffuser area.
Design & Fitment: Built from OEM Data
A recurring issue with aftermarket body kits is inconsistent fitment — gaps at the edges, misaligned mounting points, or components that require trimming and modification to sit flush. Maremlyn addresses this by developing every piece directly from 3D-scanned OEM vehicle data, not manual measurements.
The result:
- Front lip follows the factory bumper's lower edge precisely, with pre-applied 3M adhesive channels and reinforced screw points at the wheel arch returns.
- Side skirts align with the factory rocker panel crease line, secured with multiple self-tapping screws underneath — no drilling into visible body panels required.
- Rear lip wraps the lower bumper contour, locked in place at the center and both corners.
This data-driven approach means the kit can be installed with basic hand tools and no permanent body modification — an important consideration for leased vehicles or markets where modifiability affects resale value.
Material Choice: Why PP?
Maremlyn chose PP (polypropylene) over common alternatives like ABS or fiberglass for this kit. The reasoning is practical:
- Impact flexibility: PP absorbs minor impacts by flexing rather than cracking — critical for front lips that encounter speed bumps, driveway ramps, and parking curbs in daily use.
- UV and temperature stability: Unlike ABS, PP maintains its shape and color through repeated heat cycles without warping or fading.
- Paintability: Raw PP can be sanded, primed, and painted to match any body color, or left as-is in the factory carbon fiber pattern finish.
For B2B buyers sourcing body kits for resale, PP's durability translates directly into lower warranty claims and fewer fitment complaints.
BYD Sealion 7 Surround Shot Video
Market Opportunity: Why Sealion 7 Accessories Matter
The BYD Sealion 7 is rolling out across multiple right-hand-drive and left-hand-drive markets — from Southeast Asia and Australia to Europe and Latin America. Each new market launch creates demand for localized accessory supply chains.
Key data points for B2B buyers evaluating this category:
- The Sealion 7 shares its platform with the Seal sedan but has a unique body shape, creating a dedicated accessory SKU opportunity — parts are not cross-compatible.
- Early-adopter owners in new EV markets tend to invest heavily in personalization accessories within the first 6 months of ownership.
- A body kit is a high-perceived-value, low-installation-barrier product — compared to performance mods or interior re-trims, exterior bolt-on kits offer a faster return-to-customer timeline.
Maremlyn supports wholesale and OEM/ODM inquiries with flexible ordering terms, including custom logo and packaging options.
FAQ
Q: Does this body kit require drilling into visible body panels?
No. All fastening points are located on the underside of the bumpers and rocker panels, or inside the wheel arch returns. The installation is reversible — removing the kit leaves no visible holes on exterior surfaces.
Q: Is the kit compatible with both LHD and RHD Sealion 7 models?
Yes. The body kit mounts to the exterior body panels, which are identical between LHD and RHD configurations.
Q: Can the carbon fiber pattern be painted over?
Yes. The PP surface can be sanded, primed, and painted to match any factory or custom color. Maremlyn recommends a professional body shop for paint application to ensure adhesion on PP material.
Q: What is included in the package?
Each kit includes: front lip, left side skirt, right side skirt, rear lip, pre-applied 3M double-sided tape, self-tapping screws, and an installation guide with reference photos.
Q: Do you offer wholesale or custom branding?
Yes. Maremlyn supports OEM/ODM orders including custom logo embossing, branded packaging, and private-label documentation. Contact the factory directly for pricing and minimums.
Conclusion
The Maremlyn BYD Sealion 7 body kit delivers a cohesive, OEM-quality exterior upgrade that transforms the SUV's road presence without permanent modification. For B2B buyers — whether you are an auto parts distributor, an e-commerce retailer, or an EV specialty shop — this is a well-timed product in a rapidly expanding vehicle ecosystem.
The Sealion 7 accessory market is still in its early stages, and body kits represent one of the highest-margin, highest-demand categories in the exterior segment. Getting inventory in place before the next wave of market launches positions your business ahead of competitors still sourcing generic, non-model-specific parts.
Inquire about bulk pricing, samples, or custom branding: [email protected] | +86-13535576667 View product page